The advantage of GRIP-D repair clamps is that is can befitted to existing pipes in situation, without any need to remove and replacing pipes, GRIP-R pipe repair clamp can repair the pipes that are ageing and corrosive and pipe wall has holes or cracks . When installing it, it only needs pipe clamp to wrap the leakage part and tighten the bolt. Then the installation is finished ideally and reliably.
GRIP-D Tekniska parametrar
| Rör utanför diameter | Klämområde | Arbetstryck | Bredd | Bult | ||||||||
| Va |  |  | B | C | utan remsa | med stripinsats (max) | ||||||
| （Mm） | (I.) | （Mm） | (bar) | (bar) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | M | |
| 180 | 7.087 | 16 | 30 | 204 | 142 | 250 | 75 | 40 | 60 | M12 × 2 | ||
| 200 | 7.874 | 16 | 30 | 224 | 142 | 250 | 75 | 40 | 60 | |||
| 216-222 | 16 | 30 | 142 | 250 | 75 | 40 | 60 | |||||
| 250 | 247-253 | 16 | 25 | 282 | 142 | 250 | 75 | 40 | 80 | |||
| 10.512 | 16 | 25 | 299 | 142 | 250 | 75 | 40 | 80 | ||||
| 273 | 10.748 | 270-276 | 16 | 25 | 305 | 142 | 250 | 75 | 40 | 80 | ||
| 304 | 10 | 20 | 336 | 142 | 250 | 75 | 40 | 80 | ||||
| 323.9 | 10 | 20 | 355.9 | 142 | 250 | 75 | 40 | 80 | ||||
| 14.000 | 352-359 | 8.5 | 16 | 142 | 250 | 75 | 40 | 80 | ||||
| 377 | 8.5 | 16 | 409 | 142 | 250 | 75 | 40 | 80 | ||||
| 406.4 | 7.5 | 16 | 142 | 250 | 75 | 40 | 80 | |||||
| 18.000 | 6.5 | 12 | 489 | 142 | 250 | 75 | 40 | 80 | ||||
| 508 | 6 | 10 | 540 | 142 | 250 | 75 | 40 | 120 | M16 × 2 | |||
| 558.8 | 554-564 | 5.5 | 10 | 142 | 250 | 75 | 40 | 160 | ||||
| 609.6 | 605-615 | 5 | 10 | 142 | 250 | 75 | 40 | 160 | ||||
| 711.2 | 4 | 5 | 743.2 | 142 | 250 | 75 | 40 | 160 | ||||
| 762 | 4 | 5 | 794 | 142 | 250 | 75 | 40 | 160 | ||||
| 809-817 | 4 | 5 | 142 | 250 | 75 | 40 | 160 | |||||
| 914.4 | 910-918 | 4 | 5 | 946.4 | 142 | 250 | 75 | 40 | 160 | |||
| 1016 | 40.000 | 4 | 5 | 1048 | 142 | 250 | 75 | 40 | 200 | |||
| 1117.6 | 44.000 | 1113-1122 | 3.5 | 5 | 142 | 250 | 75 | 40 | 200 | |||
| 3.5 | 5 | 142 | 250 | 75 | 40 | 200 | ||||||
| 1316-1325 | 3 | 5 | 142 | 250 | 75 | 40 | 240 | |||||
| 56.000 | 3 | 5 | 142 | 250 | 75 | 40 | 240 | |||||
| 1524 | 60.000 | 2.5 | 5 | 1556 | 142 | 250 | 75 | 40 | 240 | |||
| 1625.6 | 2.5 | 5 | 1657.6 | 142 | 250 | 75 | 40 | 240 | ||||
| 1727.2 | 1722-1732 | 2.5 | 5 | 1759.2 | 142 | 250 | 75 | 40 | 240 | |||
| 1828.8 | 2 | 5 | 1860.8 | 142 | 250 | 75 | 40 | 240 | ||||
| 2 | 5 | 142 | 250 | 75 | 40 | 240 | ||||||
| 2032 | 2027-2037 | 2 | 5 | 2064 | 142 | 250 | 75 | 40 | 240 | |||
| Material / komponenter | V1 | V2 | V3 | V4 | V5 | V6 |
| AISI 304 | AISI 304 | |||||
| AISI 304 | AISI 304 | AISI 304 | AISI 4135 | |||
| Barer | AISI 304 | AISI 304 | AISI 304 | AISI 4135 | ||
| Remsainsats (valfritt) |
| Tätningsmaterial | Media | Temperaturområde |
| Epdm | ||
| Nbr | ||
| Mvq | ||